Tag Battery Management
Overview
Proper battery management is crucial for maintaining reliable RTLS tag operation. This guide covers battery specifications, replacement procedures, and optimization strategies.
Battery Specifications
Supported Battery Types
| Tag Series | Battery Type | Capacity | Voltage | Quantity |
|---|
| LC01 | CR2032 | 225mAh | 3.0V | 1x |
| LC03 | CR2450 | 620mAh | 3.0V | 2x |
| Vehicle Tags | External | N/A | 12-24V | N/A |
| Special | Application specific | Varies | Varies | Varies |
Expected Battery Life
Life Estimates
| Configuration | Update Rate | Features | Life Expectancy |
|---|
| High Precision | 10Hz | All active | 3-6 months |
| Standard | 1Hz | Basic | 1-2 years |
| Power Save | 0.2Hz | Minimal | 3-5 years |
| Motion Based | Variable | Selective | 1-3 years |
Battery Replacement
Replacement Procedure
-
Preparation
- Clean workspace
- Proper tools
- New battery
- ESD protection
-
Tag Access
- Power down tag
- Open battery compartment
- Note orientation
- Remove old battery
-
Installation
- Clean contacts
- Insert new battery
- Verify polarity
- Close compartment
-
Verification
- Power up check
- LED indication
- System detection
- Position verification
Safety Guidelines
- Use approved batteries
- Maintain polarity
- Avoid metal tools
- Clean environment
- Proper disposal
Power Optimization
Configuration Strategies
| Strategy | Impact | Trade-off |
|---|
| Reduce update rate | Major positive | Lower resolution |
| Enable sleep modes | Major positive | Response delay |
| Motion activation | Moderate positive | Setup complexity |
| Sensor scheduling | Minor positive | Feature limitation |
Environmental Factors
- Temperature impact
- Signal strength
- Motion frequency
- Update demands
- Feature usage
Battery Status
- Real-time monitoring
- Historical trends
- Alert thresholds
- Replacement planning
- Usage analytics
System Integration
- RTLS Hub dashboard
- Email notifications
- API integration
- Maintenance scheduling
- Report generation
Maintenance Planning
Preventive Maintenance
- Regular inspections
- Scheduled replacements
- Performance monitoring
- Environmental checks
- System optimization
Best Practices
- Batch replacements
- Rotation strategy
- Inventory management
- Testing protocol
- Documentation
Troubleshooting
Common Issues
| Issue | Possible Cause | Solution |
|---|
| Short life | High update rate | Adjust configuration |
| No power | Poor contact | Clean/adjust contacts |
| Intermittent | Low battery | Replace battery |
| System error | Configuration | Reset/reconfigure |
Diagnostic Steps
- Check battery voltage
- Verify configuration
- Test in known state
- Monitor performance
- Document findings
Always use approved battery types and follow proper handling procedures. Incorrect battery replacement can damage tags or create safety hazards.
For specialized tag variants or custom power configurations, consult the specific product documentation or contact Locus support.
